Banner Q45 Series - Manual (Page 6)

Dimensions
Q45XDN
6 P/N 46655 rev. C
™
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
See table
at left
50.8 mm
(2.00")
69.0 mm
(2.72")
87.6 mm
(3.45")
30.0 mm
(1.18")
6.4 mm
(0.25")
Lens
Centerline
7.1 mm
(0.28")
5 mm (#10) Screw
Clearance (2)
4-Pin 12mm Euro-style
Quick Disconnect Connector External Thread
M30 x 1.5
Transparent Cover (Gasketed)
View: Sensing Status (Red)
(all models except emitters)
Power Suppy (Green)
Raise to Access:
Sensitivity (Gain) Adjustment
44.5 mm
(1.75")
A 30 mm jam nut is
supplied for mounting
Hookups
1 Shield
5 Communications - Blue
4 Communications + White
3 BUS power (-V) Black
2 BUS power (+V) Red
Pin Function Wire Color
Overall Sensor Depth
Suffix Depth
E (emitter),
D (short-range diffuse),
DL (long-range diffuse),
LV (retroreflective), and
R (receiver)
54.6 mm
(2.15")
CV and CV4 (convergent)
61.5 mm
(2.42")
LP (polarized retroreflective)
56.4 mm
(2.30")
F (glass fiber optic)
60.5 mm
(2.38")
FP (plastic fiber optic)
59.8 mm
(2.35")
Q45X Male Connector
Male Pinout
4
1 3
5
2
The Q45XDN sensor requires DeviceNet-compatible quick-disconnect cable which is available from various manufacturers, such as
interlinkBT.