Banner K80L Segmented EZ-LIGHT User Manual
Ez-light® k80l segmented indicator

Point-of-Use Indicator with 1, 2, 3, or 4 Color Segments
.
• Individual color segments can be lighted separately or in combination
• For error-proofing and “Andon”* applications
• Provides operator guidance, even for those with limited color recognition ability
• PNP (sourcing) or NPN (sinking) input type, depending on model
• Optional labels for enhanced segment identification
* Andon lights on machines or production lines indicate operation status. They are often located
overhead for workers or a supervisor to view them.
Model*
LED
Colors**
Inputs
K80L4GRYB1PQ
1: Green
2: Red
3: Yellow
4: Blue
PNP
K80L4GRYB1NQ
NPN
K80L3THGRYX1PQ
1: Green
2: Red
3: Yellow
PNP
K80L3THGRYX1NQ
NPN
Model*
LED
Colors**
Inputs
K80L2HGRXX1PQ
1: Green
2: Red
PNP
K80L2HGRXX1NQ
NPN
K80L1WXXX1PQ
1: White
PNP
K80L1YXXX1PQ
1: Yellow
K80L1RXXX1PQ
1: Red
K80L1GXXX1PQ
1: Green
K80L1BXXX1PQ
1: Blue
* Integral QD models only are listed.
• For 150 mm PVC pigtail with QD, replace Q with QP in model number (example, “K80L4GRYB1PQP”).
• For terminal-wired models, omit suffix Q from model number (example, “K80L4GRYB1P”).
• For 150 mm (6") PUR pigtail cable with 5-Pin threaded Euro-Style QD, add suffix QPMA to the model number (example,
“K80L4GRYB1PQPMA”)
• A model with a QD requires a mating cable (see
** Contact factory for other colors and segment combinations.
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to seri-
ous injury or death. This product does NOT include the self-checking redundant circuitry necessary to
allow its use in personnel safety applications. A sensor failure or malfunction can cause either an ener-
gized or de-energized sensor output condition.
EZ-LIGHT® K80L Segmented Indicator
P/N 132728 rev. D
6/19/2012
0 132728
1