Banner ECONO-BEAM SE61 Series - Manual (Page 4)

ECONO-BEAM Sensors –
Miniature Self-Contained DC Sensors
page 4
Banner Engineering Corp. • Minneapolis, U.S.A.
Website: http://www.baneng.com • Tel: 888.373.6767
Diffuse mode performance based on 90% reflectance white test card
SE612FNC
Models* Range Cable
Supply
Voltage
Output
Type
Excess Gain Beam Pattern
SE612F
Range
varies by
sensing
mode
and fiber
optics
used
2 m (6.5') 10-30V dc
Bipolar
NPN/PNP
LO
1
10
100
10 mm
0.4 in
100 mm
4 in
1000 mm
40 in
1 mm
0.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
SE612F
Opposed Mode
IT23S Fibers
IT13S Fibers
500 mm
20 in
400 mm
16 in
300 mm
12 in
200 mm
8 in
100 mm
4 in
0
0
25 mm
50 mm
75 mm
25 mm
50 mm
75 mm
0
1 in
2 in
3 in
1 in
2 in
3 in
DISTANCE
SE612F
Opposed Mode
IT13S IT23S
Bipolar
NPN/PNP
DO
37.5 mm
1.5 in
30 mm
1.2 in
22.5 mm
0.9 in
15 mm
0.6 in
7.5 mm
0.3 in
0
0
0.65 mm
1.3 mm
1.9 mm
0.65 mm
1.3 mm
1.9 mm
0
0.025 in
0.050 in
0.075 in
0.025 in
0.050 in
0.075 in
DISTANCE
SE612F
Diffuse Mode
BT23S BT13S
1
10
100
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
1 mm
.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
SE612F
Diffuse Mode
Glass Fibers
BT23S Fiber
BT13S Fiber
*NOTES:
• 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., SE612F W/30).
• High-speed models may be ordered by adding suffix “MHS” to the model number of any standard ECONO-BEAM dc sensor (e.g., SE612FMHS).
Response time for these sensors decreases to 1 millisecond; faster response comes at the expense of lower excess gain.
Infrared, 880 nm
ECONO-BEAM Glass Fiber Optic
Ideal for situations where hostile environments or space restrictions prohibit placing the sensor itself in the sensing
position. The response time required by model SE612F is 10 milliseconds (0.01 seconds). If fast-moving objects are
to be detected, select a fiber optic assembly which senses the object for a long period of time. (For example, a
bifurcated fiber optic with a rectangular bundle termination like model BR2.53S may be positioned so that the object
is detected while it passes along the entire length of the rectangular sensing area.) Not recommended for
applications requiring bending or repeated flexing of fibers.