Banner ECONO-BEAM SE61 Series - Manual

ECONO-BEAM ® Sensors
Miniature Self-Contained DC Sensors
Printed in USA P/N 03410B0F
ECONO-BEAM Features
• Small, low cost, self-contained sensors engineered to provide reliable sensing, primarily in straightforward OEM applications
• Simple installation with no adjustments
• 10 to 30V dc operation
• Bipolar outputs (one NPN and one PNP); each output rated at 150 milliamps
• Choose models for light operate or dark operate
• Totally solid-state and epoxy-encapsulated for unlimited life
• Very compact, yet rugged enough to withstand tough sensing environments; rated IP66, NEMA 4X
Infrared, 880 nm
ECONO-BEAM Opposed Mode Emitter (E) and Receiver (R)
Models* Range Cable
Supply
Voltage
Output
Type Excess Gain Beam Pattern
SE61E
SE61R
1.8 m
(6')
2 m (6.5') 10-30V dc
Bipolar
NPN/PNP
LO
1
10
100
0.1 m
0.33 ft
1 m
3.3 ft
10 m
33 ft
0.01 m
0.033 ft
E
X
C
E
S
S
G
A
I
N
DISTANCE
1000
Opposed Mode
2.4 m
8 ft
3.0 m
10 ft
1.8 m
6 ft
1.2 m
4 ft
.6 m
2 ft
0
0
100 mm
200 mm
300 mm
100 mm
200 mm
300 mm
0
4 in
8 in
12 in
4 in
8 in
12 in
DISTANCE
Opposed Mode
*NOTES:
• 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., SE61RNC W/30).
• High-speed models may be ordered by adding suffix “MHS” to the model number of any standard ECONO-BEAM dc sensor (e.g., SE61EMHS).
Response time for these sensors decreases to 1 millisecond; faster response comes at the expense of lower excess gain.
Bipolar
NPN/PNP
DO
SE61E
SE61RNC
Due to their small size, right-angle design, and unique shape, this sensor pair is ideal for mounting
against the side rails of conveyors for use in flow control and product sensing, and are an excellent
choice for use on supermarket checkout stands. They may be bolted face-to-face to form a powerful
slot sensor for edgeguiding of opaque materials or for sensing gear teeth, timing rings, or “flags,” with
enough excess gain to operate even in the dirtiest sensing environments.
Effective Beam: 3 mm