Banner WORLD-BEAM QS30 Series - Manual (Page 7)

P/N 119165 rev. A
7
WORLD-BEAM ® QS30 – DC Voltage
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Accessory Brackets
SMBQS30L
• 14-gauge, stainless steel right-angle
bracket for cable models
• Clearance for M4 (#8) hardware
• ± 12° tilt adjustment
SMBQS30LT
• 14-gauge stainless steel for QD models with
right-angle cables
• Tall right-angle mounting bracket
• ± 8° tilt adjustment
SMBQS30Y
• Heavy-duty die-cast bracket
• M18 vertical mounting option
• ± 8° tilt adjustment with cabled units
• Nuts and lockwasher included
SMBQS30YL
• Die-cast bracket with replaceable acrylic
window to protect sensor from weld flash
• Designed for use with long-range opposed-
mode (EX/RX) sensors
• Not recommended for diffuse-mode sensors;
call factory for suitability with other models
64.4mm
[2.54"]
1.9mm
[0.07"]
4.5mm
[0.18"]
24.0mm
[0.95"]
11.0mm
[0.43"]
ø4.3mm
[ø0.17"]
44.0mm
[1.73"]
22.0mm
[0.87"]
24 °
R35.0mm
[R1.38"]
59.4mm
[2.4"]
R33.0mm
[R1.3"]
20 °
33.0mm
[1.3"]
4.5mm
[0.18"]
24.0mm
[0.95"]
11.0mm
[0.43"]
ø4.3mm
[ø0.17"]
44.0mm
[1.73"]
R35.0mm
[R1.38"]
1.9mm
[0.07"]
22.0mm
[0.87"]
16 °
R1.7mm
[R0.07"]
R33.0mm
[R1.3"]
91.4mm
[3.60"]
86.4mm
[3.4"]
20 °
16.35 mm
(0.64")
24.0 mm
(0.94")
35.0 mm
(1.38")
13.3 mm
(0.52")
26.5 mm
(1.04")
18.0 mm
(0.71")
56 mm
(2.20")
7.0 mm
(0.28")
33 mm
(1.30")
17.0 mm
(0.67")
M18 X 1
4 X Ø 3.3 mm
(0.13")
2 X R 33.0 mm
(1.30")
33 mm
(1.30")
33 mm
(1.30")
4x ø3.3 mm
(0.13")
M18 x 1-6g
23 mm
(0.91")
11.5 mm
(0.45")
27.5 mm
(1.08")
50.5 mm
(1.99")
16.4 mm
(0.64")
11 mm
(0.43")
56 mm
(2.20")
18 mm
(0.71")
32.6 mm
(1.28") 2x 8º
13.8 mm
(0.54")
2x 20º
7 mm (0.27")
18.0 mm
(0.71")