Banner WORLD-BEAM QS30 Series - Manual (Page 7)

P/N 119166 rev. B
7
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
WORLD-BEAM
®
QS30 – Universal Voltage
Accessory Brackets
Retroreflective Targets
See the Accessories section of your current Banner
Photoelectric Sensors catalog for complete information.
NOTE: Polarized sensors require corner-cube type
retroreflective targets only.
SMB30A
• 30 mm 12-gauge, 304 stainless
steel, right-angle mounting bracket
with a curved mounting slot for
versatile orientation
• Clearance for M6 (1/4")
hardware
SMB30FA
• 30 mm, 14-gauge, 304 stainless
steel swivel bracket with tilt and
pan movement for precision
adjustment
SMBAMS30RA
• 12-gauge, 300 series stainless
steel, right-angle SMBAMS
series bracket with 30 mm hole
for mounting sensors
• Articulation slots for 90+° of
rotation
SMBAMS30P
• 12-gauge, 300 series stainless
steel, flat SMBAMS series
bracket with 30 mm hole for
mounting sensors
• Articulation slots for 90+° of
rotation
SMBQS30L
• 14-gauge, stainless steel right-
angle bracket for cable models
• Clearance for M4 (#8)
hardware
• ± 12° tilt adjustment
SMBQS30LT
• 14-gauge stainless steel for
QD models with right-angle
cables
• Tall right-angle mounting
bracket
• ± 8° tilt adjustment
SMB30SC
• 30 mm split clamp with swivel,
black reinforced thermoplastic
polyester
• Stainless steel hardware
included
SMB30MM
• 30 mm, 11-gauge, stainless
steel bracket with curved
mounting slots for versatile
orientation
• Clearance for M6 (1/4")
hardware