Banner WORLD-BEAM QS30 Series - Manual (Page 4)

WORLD-BEAM
®
QS30 – Universal Voltage
4
P/N 119166 rev. B
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Specifications
Supply Voltage
Universal Voltage: 24 to 250V ac, 50/60 Hz or 12 to 250V dc (1.0 watt maximum)
Protected against transient voltages
Output Configuration SPDT (Single-Pole Double-Throw) electromechanical relay output (all models except emitters).
Output Rating
Max. Switching Power (resistive load): 150 W, 1250 VA
Max. Switching Voltage (resistive load): 250V ac; 125V dc
Max. Switching Current (resistive load): 5 A @ 250V ac; 5 A @ 30V dc derated to 200 mA @ 125V dc
Min. Voltage and Current: 5V dc, 10 mA
Mechanical life of relay: 50 million operations
Electrical life of relay at full resistive load: 100,000 operations
Output Response
15 milliseconds ON and OFF
NOTE: 100 millisecond delay on power-up; output does not conduct during this time.
Cutoff Point Tolerance Fixed-Field Only: ± 5% of nominal cutoff distance
Indicators
2 LED indicators on sensor top:
Green ON steady: Power ON
Yellow ON steady: Light sensed
Yellow flashing: Marginal excess gain (1.0 to 1.5x excess gain)
Large, oval LED indicator on sensor back (except emitters):
Yellow ON steady: Normally open output is conducting
Construction ABS housing, rated IEC IP67; NEMA 6; Acrylic lens cover
Connections 2 m (6.5') or 9 m (30') 5-wire PVC cable
Operating Conditions
Temperature: -20° to +70° C (-4° to +158° F)
Relative Humidity: 90% @ 50° C (non-condensing)
Certifications
US