Banner S18 Series - Manual

Datasheet
• Featuring EZ-BEAM ® technology for reliable sensing without the need
for adjustments
• Completely epoxy-encapsulated to provide superior durability,
designed to meet rigorous IP69K standards for use in 1200 psi
washdowns
• Innovative dual-indicator system for simple sensor performance
monitoring
• Advanced diagnostics to warn of marginal sensing conditions or output
overload
• 10 to 30V dc; choose SPDT (complementary) NPN or PNP outputs (150
mA max. ea.)
Sensing Mode Range LED Output Model
OPPOSED
20 m (66 ft) Infrared 950 nm
- S186E
NPN S18SN6R
PNP S18SP6R
RETRO
2 m (79 inches) Infrared 950 nm
NPN S18SN6L
PNP S18SP6L
P
POLAR RETRO 1
2 m (79 inches) Visible Red 680 nm
NPN S18SN6LP
PNP S18SP6LP
DIFFUSE
100 mm (4 inches)
Infrared 880 nm
NPN S18SN6D
PNP S18SP6D
300 mm (12 inches)
NPN S18SN6DL
PNP S18SP6DL
FIXED-FIELD
25 mm (1 inch) cutoff
Infrared 880 nm
NPN S18SN6FF25
PNP S18SP6FF25
50 mm (2 inches) cutoff
NPN S18SN6FF50
PNP S18SP6FF50
100 mm (4 inches) cutoff
NPN S18SN6FF100
PNP S18SP6FF100
To order the 9 m (30 ft) cable model, add suffix "W/30" to the cabled model number. For example, S186E W/30. To order
the 4-pin Euro-style QD models, add suffix "Q". Models with a QD connector require a mating cable.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
1 Use polarized models when shiny objects will be sensed.
S18 Sensors (DC-Voltage Series)
Original Document
121522 Rev. B
10 March 2014
121522