Banner Q60 Background Suppression Series - Manual (Page 10)

10
P/N 114348
Q60LAF Series Laser Adjustable-Field Sensors
Banner Engineering Corp. • Minneapolis MN, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Specifications, continued
Adjustments
Slotted, geared, 2-turn, cutoff range adjustment screw (mechanical stops on both ends of travel)
2 momentary push buttons: ON-Delay (+) and OFF-Delay (– ) (DC models also have remote program wire)
ON-Delay select: 8 ms to 16 seconds
OFF-Delay select: 8 ms to 16 seconds
LO/DO select
Push button lockout for security
Laser Enable/Disable (remote wire only)
Construction Housing: ABS/polycarbonate Window: Acrylic
Environmental Rating IEC IP67; NEMA 6
Connections
Q60BB6LAF (DC) models: 2 m (6.5') or 9 m (30') attached cable, 5-pin Euro-style integral QD fitting, or
5-pin Euro-style 150 mm (6") QD pigtail
Q60VR3LAF Universal models: 2 m (6.5') or 9 m (30') attached cable, or 5-pin Micro-style 150 mm (6") QD
fitting
Operating Conditions
Temperature:
Q60BB6LAF (DC) models: -10° to +50°C (+14° to 121°F)
Q60VR3LAF Universal models: -10° to +45°C (+14° to 113°F)
Maximum Relative Humidity: 90% at 50°C (non-condensing)
17.0 mm
(0.67")
77.6 mm
(3.06")
Q60BB6AFV200Q
75.0 mm
(2.95")
52.0 mm
(2.05")
14.0 mm
(0.55")
15.2 mm
(0.60")
4.9 mm
(0.19")
67.0 mm
(2.64")
4.0 mm
(0.16")
4.0 mm
(0.16")
52.0 mm
(2.05")
60.0 mm
(2.36")
25.0 mm
(0.98")
2x ø 4.2 mm
(0.17")
M3 hardware is included:
2 screws (M3 x 0.5 x 30 ppms)
2 hex nuts
2 lock washers
ON OFF DELA
Y
DELA
Y
DO SIG LO
RANGE
Q60BB6AFV200
– +
Dimensions