Banner PicoDot PD Series User Manual
Pd49 series ruggedized picodot, Datasheet, Retroreflective-mode models
![background image](/manuals/587592/1/background.png)
Datasheet
•
Environmentally sealed housing is only slightly larger than standard PD45
models, with all the functionality. Rated IEC IP67; NEMA 6
•
Class 2 laser diode light source
•
Convergent beam models have precise, high-energy sensing spot at focus,
available in four focal lengths: 50 mm (2 in), 100 mm (4 in), 200 mm (8 in),
and 300 mm (12 in)
•
Retroreflective models have precise, narrow beam; excellent for sensing the
presence of tiny parts at close range, small parts at medium ranges, and for
accurate sensing over long distances
•
Fast, 0.2 millisecond sensing response for high-speed sensing or counting
•
10 to 30 V dc operation; choice of NPN or PNP complementary solid state output
•
Choose models with 2 m (6.5 ft) or 9 m (30 ft) unterminated cable, or with 150
mm (6 in) Euro-style pigtail quick-disconnect (QD) connector
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Retroreflective-Mode Models
Excellent for applications where high sensing power and small beam size are
important. Operates over sensing ranges typically accomplished only by
conventional opposed-mode photoelectrics; uses a special filter to polarize the
emitted light, filtering out unwanted reflections from shiny objects.
To order 9 m (30 ft) cables, add “W/30” to the model number of any cabled
sensor (e.g., PD49VN6LLP W/30). Models with QD connectors require a mating
cable.
P
POLAR RETRO
Visible Red; Class 2 laser; 650 nm
Models
Range
1
Cable
Output
Type
Excess Gain
2
PD49VN6LLP
0.2 to 10.6 m (8 in
to 35 ft)
2 m (6.5 ft) cable
NPN
1
10
100
1.0 m
3.3 ft
10 m
33 ft
100 m
330 ft
0.1 m
0.33 ft
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Retroreflective PicoDot
with BRT-51X51BM
PD49VN6LLPQ
5-pin QD 150 mm (6 in)
pigtail
PD49VP6LLP
2 m (6.5 ft) cable
PNP
PD49VP6LLPQ
5-pin QD 150 mm (6 in)
pigtail
1 Tested using a BRT-51x51BM retro target (included with each sensor). Actual range depends on the efficiency and size of the retroreflective target used.
Some targets have produced ranges up to 39.6 m (130 ft).
2 Performance based on BRT-51X51BM retroreflective target
PD49 Series Ruggedized PicoDot
®
P/N 67450 Rev. B
20 December 2013