Banner Q45 Laser DC Series - Manual (Page 2)

45LM Series Modules
page 2
Programming of Output Timing Functions
Plug-in module models 45LM5 and 45LM5D may be programmed for ON-Delay,
OFF-Delay, or combined ON/OFF-Delay timing functions. Either delay may be
programmed independently for a short time range (up to 1 second) or for a long time
range (up to 15 seconds). A 15-turn potentiometer is dedicated to each delay to allow
precise adjustment of the delay within the selected time range.
NOTE: The ON-Delay timer adjustment is labeled “DELAY” and the OFF-Delay timer
adjustment is labeled “HOLD.”
Plug-in module models 45LM8, 45LM8M1,45LM8D,and 45LM8DM1 may be
programmed for either a One-Shot output pulse or a Delayed One-Shot timer. For
models 45LM8 and 45LM8D, the pulse and delay may be programmed independently
for a short time range (up to 1 second) or for a long time range (up to 15 seconds).
For models 45LM8M1 and 45LM8DM1, the pulse and delay may be programmed
independently for a short time range (up to 0.1 second) or for a long time range (up
to 1.5 seconds). A 15-turn potentiometer is dedicated to each delay to allow precise
adjustment of the delay within the selected time range.
NOTE: The Delay timer adjustment is labeled “DELAY” and the
Pulse timer adjustment is labeled “HOLD.”
45LM5 and 45LM5D Timing
Logic Function and Timing Range(s)
Switch Positions
ON-Delay
1 second max. ON OFF OFF OFF
15 seconds max. OFF ON OFF OFF
OFF-Delay
1 second max. OFF OFF ON OFF
15 seconds max. OFF OFF OFF ON
ON-Delay &
OFF-Delay
1 second max.
1 second max.
ON OFF ON OFF
1 second max.
15 seconds max.
ON OFF OFF ON
15 seconds max.
1 second max.
OFF ON ON OFF
15 seconds max.
15 seconds max.
OFF ON OFF ON
#1 #2 #3 #4
DELAY
HOLD
Adjustment Locations TIMING DIAGRAMS
1 SEC DELAY
15 SEC DELAY
15 SEC HOLD
NC OUTPUT
ON
12
3
4
OUTPUT
ONE-SHOT PULSE PULSE
SIGNAL
OUTPUT
DELAYED
ONE-SHOT
PULSE PULSE DELAY
SIGNAL
DELAY
DELAY
HOLD
Adjustment Locations TIMING DIAGRAMS
1 SEC DELAY
15 SEC DELAY
1 SEC HOLD
15 SEC HOLD
ON-Delay
OUTPUT
ON-Delay
ON/OFF-Delay
SIGNAL
OUTPUT
SIGNAL
ON-Delay OFF-Delay
ON
12
3
4
NOTE: 1) Delay is non-retriggerable. Pulse is retriggerable if the Delay time is
less than the One-Shot pulse time.
2) If both ranges of the delay function are selected (both 1 second and
15 second switches are ON) the delay time range becomes 16
seconds, maximum.
3) With switches #1 and #2 OFF (no delay programmed), delay is
adjustable from “negligible” up to 10 milliseconds, maximum.
NOTE: 1) If both ranges of either delay function are selected (both 1 second
and 15 second switches are ON), the delay time range becomes 16
seconds, maximum.
2) With switches #1 and #2 OFF (no ON-Delay programmed), ON-Delay
is adjustable from “negligible” up to 100 milliseconds, maximum.
3) With switches #3 and #4 OFF (no OFF-Delay programmed), OFF-
Delay is adjustable from “negligible” up to 100 milliseconds,
maximum.
DELAY
HOLD
12
3
4
ON
Figure 2. DIP switches for programming
Delay logic
45LM8(M1) and 45LM8D(M1) Timing
Logic Function and Timing Ranges*
Switch Positions
15 seconds max. delay (1.5)
1 second max. pulse (0.1)
OFF ON
One-Shot
1 second max. pulse (0.1) OFF OFF OFF –
15 seconds max. pulse (1.5) OFF OFF ON –
Delayed
One-Shot
1 second max. delay (0.1)
1 seconds max. pulse (0.1)
ON OFF OFF –
OFF –
15 seconds max. delay (1.5)
15 seconds max. pulse (1.5)
OFF ON
1 second max. delay (0.1)
15 seconds max. pulse (1.5)
ON OFF ON –
ON –
* Maximum times for models 45LM8M1 and 45LM8DM1 are in parentheses.
** For normal output (output conducts during pulse time), turn switch #4 OFF
To invert the output, turn switch #4 ON
#1 #2 #3 #4**