Banner Q45 Laser DC Series - Manual (Page 3)

P/N 63416 rev. A
3
45LM Series Modules
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Selecting ON-Delay Time Range
Switch 4 Switch 5
Delay
(min. to max.)
OFF OFF OFF – no delay
OFF ON 0.01 to 0.15 sec.
ON OFF 0.1 to 1.5 sec.
ON ON 1 to 15 sec.
Selecting Hold Time (OFF-Delay) Range
Switch 6 Switch 7
Hold
(min. to max.)
OFF OFF OFF – no hold
OFF ON 0.01 to 0.15 sec.
ON OFF 0.1 to 1.5 sec.
ON ON 1 to 15 sec.
Selecting Output State
Switch 8 Output State
Rate Sensor Logic
ON Output de-energizes above the set rate
OFF Output energizes above the set rate
Flip-Flop Logic
ON Output changes state at trailing edge of signals
OFF Output changes state at leading edge of signals
All Other Logic
ON Normally closed: output de-energizes during Hold time
OFF Normally open: output energizes during Hold time
Output Timing Function: ON-delayed one-shot
Switch 1 Switch 2 Switch 3 Other Settings
OFF ON OFF –
Output
Signal
Hold Delay
Output Timing Function: Repeat cycle timer
Switch 1 Switch 2 Switch 3 Other Settings
OFF OFF ON –
Output
Signal
Hold Delay Hold Delay
Output Timing Function: Limit timer
Switch 1 Switch 2 Switch 3 Other Settings
ON OFF ON –
Output
Signal
Hold
Output Timing Function: Rate sensor
Switch 1 Switch 2 Switch 3 Other Settings
OFF ON ON –
Output
< Hold
Signal
> Hold
Output Function: Flip-flop
Switch 1 Switch 2 Switch 3 Other Settings
ON ON ON –
Output
Signal
p/n 63416 Rev. B