Banner T-GAGE M18T Series Temperature Sensors - Manual

18 mm sensor with discrete output and TEACH-mode programming
Features
• Fast 25 ms response time (up to 20 Hz switching speed)
• Easy-to-use TEACH mode programming; no potentiometer adjustments
• Small self-contained package, no auxiliary controller needed
• Rugged encapsulated design for harsh environments
• Choose 2 meter or 9 meter unterminated cable, or 5-pin Euro-style QD connector
• Product motion not required for sensing
• Remote Teach available in both Static and Dynamic modes
Models
Model Cable* D:S Ratio Sensing Face Supply Voltage Output
M18TB8 5-wire, 2 m (6.5') shielded
cable
8:1 Integrated lens
10 to 30V dc
Bipolar (NPN and
PNP)
M18TB8Q 5-pin Euro-style integral QD
M18TB6E 5-wire, 2 m (6.5') shielded
cable 6:1 Enclosed Plastic
face (for food in-
dustry use)
M18TB6EQ 5-pin, Euro-style integral
QD
M18TB14 5-wire, 2 m (6.5') shielded
cable 14:1 Germanium lens
M18TB14Q 5-pin, Euro-style integral
QD
* For 9 m (30') cable, add suffix "W/30" to the model number of any cabled model (e.g., M18TB8 W/30). A model with a QD connector
requires an accessory mating cable. See PAGE 7 for more information.
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury
or death. This product does NOT include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A sensor failure or malfunction can cause either an energized or de-ener-
gized sensor output condition.
M18T T-Gage Sensor
P/N 120632 Rev. A 2/7/2012
0 120632 6