Specifications – Banner WORLD-BEAM Q12 Series User Manual

Page 3

Sensing Mode

Model3 4

Range

Output

Q12AP6FF50Q3

1 PNP LO

Q12RP6FF50Q3

1 PNP DO

Q12AN6FF50Q3

1 NPN LO

Q12RN6FF50Q3

1 NPN DO

Specifications

Sensing Beam

640 nm visible red

Supply Voltage and Current

10 to 30V dc (10% max. ripple) at 20 mA max current

Supply Protection Circuitry

Protected against reverse polarity and transient voltag-
es

Output Configuration

Bipolar (1 NPN and 1 PNP) solid-state output or Single
output (PNP or NPN), LO or DO, depending on model

Output Ratings

OFF-state leakage current:

· NPN: 200 µA
· PNP: 10 µA

ON-state saturation voltage:

· NPN: 1.25V at 50 mA
· PNP: 1.45V at 50 mA

Output Protection Circuitry

Protected against false pulse on power-up, short-circuit
protected

Output Response Time

Opposed Mode: 1.3 ms ON; 900 µs OFF
All Other Modes: 700 µs ON/OFF
NOTE: 120 ms delay on power-up; outputs do not con-
duct during this time.

Repeatability

175 microseconds

Switching Frequency

Opposed Mode: 385 Hz
All Other Modes: 715 Hz

Indicators

One Yellow and one Green LED (see Figure 1)

Construction

Polarized Retro Models: Thermoplastic elastomer
housing with glass lens
All Other Standard Models: Thermoplastic elastomer
housing with polycarbonate lens
Chemical-Resistant Models: Housing encased in
PFA jacket; cable encased in 3/16 in O.D. PFA tubing

Environmental Rating

Standard Models: IEC IP67
Chemical-Resistant Models: IEC IP67 (NEMA6) and
PW12 1200 psi washdown per NEMA ICS5, Annex
F-2002

Connections

Standard Models: 2 m (6.5 ft) or 9 m (30 ft) attached
PVC cable, or 150 mm (6 in) pigtail with M8 or M12
threaded connection
Chemical-Resistant Models: 2 m (6.5 ft) cable en-
cased in 3/16 in O.D. PFA tubing

Operating Conditions

Operating temperature: -20 °C to +55 °C (-4 °F to
+131 °F)
Storage temperature: -30 °C to +75 °C (-22 °F to
+167 °F)
Relative humidity: 95% max at +50 °C (+122 °F) non-
condensing

Certifications

3 For black housing, add prefix D to the model number, for example DQ12AB6FF15.

4 Q3 models: 3-pin Pico-style (M8 threaded) 150 mm (6 in) pigtail QD. Not available for bipolar models. For 9 m (30 ft) cable, add suffix W/30 to the model number,

for example, Q126E W/30. For 4-pin Pico-style (M8 threaded) 150 mm (6 in) pigtail QD, add suffix Q to the model number, for example, Q126EQ. For 4-pin Euro-
style (M12 threaded) 150 mm (6 in) pigtail QD, add suffix Q5 to the model number, for example Q126EQ5.

WORLD-BEAM® Q12 Series Sensors

P/N 119223_web
Rev. H