Banner VALU-BEAM Series - Manual (Page 8)

VALU-BEAM –
915 Series
page 8
Banner Engineering Corp. • Minneapolis, U.S.A.
Website: http://www.baneng.com • Tel: 888.373.6767
Accessories
Description
All VALU-BEAM sensors may be ordered with an integral 9 m (30')
cable in place of the standard 2 m (6.5') cable
VALU-BEAM Modifications
Model Suffix Modification
Example of Model
Number
W/30 9 m (30') cable SMW915D W/30
Style Model Length Connector
3-Pin Mini
MBCC-306
MBCC-312
MBCC-330 2 m (6.5')
4 m (12')
9 m (30')
Straight
Straight
Straight
5-Pin Mini
MBCC-506
MBCC-512
MBCC-530 2 m (6.5')
4 m (12')
9 m (30')
Straight
Straight
Straight
Quick-Disconnect (QD) Cables
Used with:
All VALU-BEAM emitters
915 Series, other than emitters
Cabling Accessories
HF1-2NPS
• Flexible black nylon cable protector
• Includes a neoprene gland that compresses around the VALU-BEAM cable to provide an
additional seal against moisture
• Resistant to gasoline, alcohol, oil, grease, solvents and weak acids
• Working temperature range of -30° to +100°C (-22° to +212°F)
Model Description
AC-6
PVC-6
RF1-2NPS 2 m (6.5') armored cable jacket I.D. 5 /
16
"; O.D. 7 /
16
"
2 m (6.5') flexible PVC tubing (not for QD models) I.D. 1 /
4
"; O.D. 3 /
8
"
Compression fitting for attaching armored cable or PVC tubing —
For all emitters
The following cables are available for extending the length of existing sensor cable. These are 30 m (100') lengths of VALU-BEAM cable. This
cable may be spliced to existing cable. Connectors, if used, must be user-supplied.
915 Series sensors, other than emitters
Extension Cables (without connectors)
Model Type Used with:
EC915-100
EC312A-100 2-conductor
5-conductor