Valu-beam, 915 series, Retroreflective targets – Banner VALU-BEAM Series User Manual
Page 10
VALU-BEAM –
915 Series
page
10
Banner Engineering Corp. • Minneapolis, U.S.A.
Website: http://www.baneng.com • Tel: 888.373.6767
65°C (150°F)
65°C (150°F)
BRT-2A
Model
Reflectivity
Factor
Maximum
Temperature
BRT-3*
1.0
1.0
84 mm diameter
65°C (150°F)
BRT-50
1.0
56 mm diameter
65°C (150°F)
65°C (150°F)
BRT-1
BRT-1.5
1.0
1.0
Size
51 mm diameter
65°C (150°F)
BRT-.6
1.0
46 mm diameter
65°C (150°F)
BRT-50D*
1.0
25 mm diameter
50°C (120°F)
50°C (120°F)
BRT-92X92C*
BRT-100X55A
50°C (120°F)
50°C (120°F)
BRT-50R*
BRT-42D
1.0
1.0
20 mm diameter
51 mm diameter
50°C (120°F)
BRT-25R
1.0
132 mm x 55 mm
50°C (120°F)
BRT-42A
1.0
100 mm x 100 mm
1.5
3.0
42 mm diameter
51 mm diameter
50°C (120°F)
BRT-77X77C*
2.0
25 mm diameter
50°C (120°F)
BRT-100X50
1.5
42 mm diameter
50°C (120°F)
50°C (120°F)
BRT-36X40BM
BRT-2X2
1.0
1.2**
85 mm x 85 mm
101 mm x 51 mm
50°C (120°F)
BRT-60X40C*
1.4
51 mm x 61 mm
50°C (120°F)
BRT-48X32
1.0
51 mm x 61 mm
50°C (120°F)
65°C (150°F)
BRT-23X14CM**
BRT-48X32B
1.0
1.2
41 mm x 60 mm
33 mm x 48 mm
50°C (120°F)
BRT-40X23
1.4
33 mm x 57 mm
50°C (120°F)
BRT-40X23B
1.4
14 mm x 23 mm
50°C (120°F)
50°C (120°F)
BRT-40X18A
BRT-35X20A
1.4
1.0
24 mm x 40 mm
24 mm x 48 mm
50°C (120°F)
BRT-53X19A
1.4
24 mm x 55 mm
50°C (120°F)
BRT-100X18A
1.4
18 mm x 60 mm
65°C (150°F)
BRT-L
.08
19 mm x 72 mm
200°C (390°F)
BRT-41AHT
1.0
19 mm x 120 mm
480°C (900°F)
BRT-4HT***
.15
165 mm x 19 mm
41 mm diameter
100 mm x 100 mm
65°C (150°F)
BRT-34
1.4
84 mm diameter
50°C (120°F)
BRT-35DM**
1.2
35 mm diameter
65°C (150°F)
BRT-80X50
50 mm x 80 mm
1.4
50°C (120°F)
BRT-48X32A
1.0
33 mm x 65 mm
65°C (150°F)
BRT-32X20AM**
1.2
24 mm x 32 mm
65°C (150°F)
BRT-62X10AM**
1.2
10 mm x 62 mm
NOTE: The range of all retroreflective sensors is specified
using target model BRT-3. Sensing range and signal
strength at any given sensor-to-target distance will vary
due to target reflectivity and target area. A “Reflectivity
Factor” is included for each target model to help predict
sensor performance, relative to the excess gain curve
plotted for target model BRT-3. Consider, also, target
area when predicting performance.
*
Optional brackets are available; see Banner Photoelectric Product Catalog
**
Target has micro-prism geometry
*** Targets are not recommended for polarized retroreflective sensors
Retroreflective Targets