Banner U-GAGE Q45U Series—Analog - Manual (Page 8)

P/N 44177 Rev. D
U-GAGE ™ Q45U Ultrasonic Sensors with Bipolar Discrete Outputs
Mounting Brackets
SMB30C
• 30 mm split clamp, black PBT bracket
• Stainless steel mounting hardware included
SMB30S
• 30 mm swivel, black PBT bracket
• Stainless steel mounting hardware included
56.0 mm
(2.20 in)
63.0 mm
(2.48 in)
45.0 mm
(1.77 in)
2.5 mm
(0.10 in)
31.5 mm
(1.24 in)
Nut Plate
M5 x 0.8
x 80 mm
Screw (2)
13 mm
(0.5 in)
13.5 mm (0.53 in)
63.5 mm
(2.50 in)
50.8 mm
(2.00 in)
M5 x 0.8
x 30 mm
Screw (2)
Not Shown:
(2) M5 x 0.8 x 60 mm
screws are supplied for
clamping bracket together
43.2 mm
(1.70 in)
25.4 mm
(1.00 in)
82.5 mm
(3.25 in)
12.2 mm
(0.48 in)
SMB30MM
• 30 mm, 11-gauge, stainless steel bracket with
curved mounting slots for versatility and orientation
• Clearance for M6 (1/4") hardware
57.2 mm
(2.25 in)
57.2 mm
(2.25 in)
ø 6.4 mm
(0.25 dia.)
25.4 mm
(1.00 in)
35.1 mm
(1.38 in)
69.9 mm
(2.75 in)
7.1 mm
.28 x 90
° (2 Slots)
R 25.4 mm
(1.00 in)
Banner Engineering Corp., 9714 Tenth Ave. No., Mpls., MN 55441 • Ph: 763.544.3164 • www.bannerengineering.com • Email: [email protected]
WARRANTY: Banner Engineering Corp.
warrants its products to be free from
defects for one year. Banner Engineering
Corp. will repair or replace, free of
charge, any product of its manufacture
found to be defective at the time it is
returned to the factory during the
warranty period. This warranty does not
cover damage or liability for the
improper application of Banner products.
This warranty is in lieu of any other
warranty either expressed or implied.
Quick-Disconnect (QD) Cables
5-Pin
Euro-style
Straight
with shield
MQDEC2-506
MQDEC2-515
MQDEC2-530 2 m (6.5')
5 m (15')
9 m (30')
Style Model Length Connector
5-Pin Mini-style
with shield
MBCC2-506
MBCC2-512
MBCC2-530 2 m (6.5')
4 m (12')
9 m (30')
7/8-16UN-2B
ø28 mm
(1.1")
61 mm max.
(2.4")
M12 x 1
ø15 mm
(0.6 in)
44 mm max.
(1.7 in)
5-Pin
Euro-style
Right-angle
with shield
MQDEC2-506RA
MQDEC2-515RA
MQDEC2-530RA 2 m (6.5')
5 m (15')
9 m (30')
38 mm max.
(1.5 in)
M12 x 1
ø15 mm
(0.6 in)
38 mm max.
(1.5 in)