beautypg.com

Maintenance, Troubleshooting guide – Blodgett RE Series User Manual

Page 17

background image

Maintenance

13

Troubleshooting Guide

POSSIBLE CAUSE(S)

SUGGESTED REMEDY

SYMPTOM: Oven will not fire.

S

Oven not plugged in.

S

Control set below ambient temperature.

S

Doors are open.

S

Plug in electrical supply cord.

S

Set to desired cook temperature.

S

Close doors.

SYMPTOM: Oven does not come to ready.

S

The oven has not reached preheat temperature.

S

Internal problem with main temperature control.

S

Wait for oven to reach preheat temperature.

S

*

SYMPTOM: Convection fan does not run.

S

Oven is not plugged in.

S

Blower switch not set to ON

S

Circuit breaker tripped.

S

Doors are open

S

Plug in electrical supply cord.

S

Set the blower switch to ON.

S

Reset the breaker.

S

Close doors.

SYMPTOM: General baking problems.

S

Thermostat out of calibration.

S

Improper oven venting.

S

*

S

*

*Denotes remedy is a difficult operation and should be performed by qualified personnel only. It is recommended, however, that

All repairs and/or adjustments be done by your local Blodgett service agency and not by the owner/operator. Blodgett cannot asĆ

sume responsibility for damage as a result of servicing done by unqualified personnel.

WARNING!!
Always disconnect the power supply before cleaning or servicing the oven.