Banner OMNI-BEAM Series - Manual (Page 3)

OMNI-BEAM Sensor Heads
page 3
OMNI-BEAM Power Blocks
Power Blocks
The power block determines the sensor operating voltage and also the sensor output
switch configuration. Models are available with a built-in 2 m (6.5') or 9 m (30')
cable, or with either Mini-style or Euro-style quick-disconnect (“QD”) plug-in cable
fittings. Emitter power blocks have no output circuitry.
Figure 3. OMNI-BEAM power blocks
provide the input and output
circuitry for OMNI-BEAM sensor
heads. Select models for either
ac or dc power.
OPBA2
OPBA2QD 2 m (6.5')
5-Pin Mini QD
105-130V ac
SPST solid-state ac relay
Two outputs: Load and Alarm OPBB2
OPBB2QD 2 m (6.5')
5-Pin Mini QD
Models
210-250V ac
Cable
0PBAE
OPBAEQD
Supply
Voltage Output Type
2 m (6.5')
5-Pin Mini QD
AC Voltage (see data sheet p/n 03531 packed with the power block)
105-130V ac
No output:
for powering emitter only sensor heads OPBBE
OPBBEQD 2 m (6.5')
5-Pin Mini QD
210-250V ac
OPBTE
OPBTEQD
OPBTEQDH 2 m (6.5')
4-Pin Mini QD
4-Pin Euro QD
No output:
for powering emitter only sensor heads
OPBT2
OPBT2QD
OPBT2QDH 2 m (6.5')
4-Pin Mini QD
4-Pin Euro QD
10-30V dc
Bi-Modal ™
NPN/PNP
Two outputs: Load and Alarm
DC Voltage (see data sheet p/n 03532 packed with the power block)
NOTE: 9 m (30') cables are availabe by adding the suffix “w/30” to the model number
of any cabled power block (for example, OPBT2 w/30).
Optional Timing Logic Modules
Timing logic may be added at any time, using one of three timing delay and pulse
logic modules. Installation is simple and quick; the logic modules simply slide into the
sensor head (see Figure 4). Program them for timing functions and ranges via four
DIP switches; each module includes easily accessible 15-turn clutched potentiometers
for accurate timing adjustments.
Figure 4. OMNI-BEAM optional timing
logic modules
Logic Function
ONE-SHOT pulse timer or
DELAYED ONE-SHOT
logic timer
OLM8
ON-DELAY or OFF-DELAY
or ON/OFF DELAY
Pulse Timer
Logic Module
Delay: 0.01 to 1 sec,
0.15 to 15 sec, or none
Pulse: 0.01 to 1 sec, 0.15 to 15 sec
Models Type Timing Ranges
ONE-SHOT pulse timer or
DELAYED ONE-SHOT
logic timer
OLM5
Delay Timer
Logic Module
OLM8M1
ON-Delay: 0.01 to 1 sec,
0.15 to 15 sec, or none
OFF-Delay: 0.01 to 1 sec,
0.15 to 15 sec, or none
Pulse Timer
Logic Module
Delay: 0.002 to 0.1 sec,
0.03 to 1.5 sec, or none
Pulse: 0.002 to 0.1 sec,
0.03 to 1.5 sec
OMNI-BEAM Timing Logic Modules
(see data sheet p/n 03533 packed with the module)