Metrohm 850 Professional IC Detector - iDetector - Manual (Page 15)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Installation
2.850.9010 IC Conductivity Detector
￭￭￭￭￭￭￭￭ 7
2 Installation
2.1 Setting up the instrument
2.1.1 Packaging
The instrument is supplied in highly protective special packaging. Keep this
packaging, as only this ensures safe transportation of the instrument.
2.1.2 Checks
Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note. In the
case of damage during transportation, see the notes in chapter 7.2War-
ranty (guarantee); page 19.
2.1.3 Location
The IC Conductivity Detector is designed for usage in the detector cham-
ber of the IC instruments. For the location, the same conditions apply as
for the IC instrument.
2.2 Inserting the detector
The IC Conductivity Detector is inserted into the instruments from the
rear.
Figure 3 shows how the detector is inserted into an 850 Professional IC
instrument within 6 simple steps. Inserting the detector into an 881 Com-
pact IC pro or 882 Compact IC plus instrument is carried out analogously.