Metrohm 786 Swing Head - Manual (Page 18)

3.3 Mounting the Swing Head to the Sample Processor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 ￭￭￭￭￭￭￭￭ 786 Swing Head
4 Place the connection cable into the guide chain (see Chapter 3.3.2,
page 11).
Mounting the Swing Head with tower extension
For certain applications, it may be necessary to mount the 786 Swing
Head at a higher position. A 6.2058.010 tower extension can be moun-
ted on the lift for this purpose.
First, remove the titration head holder from its mount (see Chapter 3.3.1,
page 8). Proceed afterwards as follows:
1 Fasten the tower extension to the lift guide of the Sample Processor in
accordance with the following illustration and fix it in place with the
screws provided.
1
Figure 4 Mounting the tower extension
2 Mount the Swing Head to the holder plate of the guide chain.