6 connecting devices to the remote socket, 1 remote connections, Connecting devices to the remote socket – Metrohm 824 Easy Sample Changer User Manual

Page 21: Remote connections, Fig. 13, Connecting a 7xx, Titrino

2.6 Connecting devices to the Remote socket

824 Easy Sample Changer,

Installation

2.6 Connecting devices to the Remote socket

Connection cable
If the 824 Easy Sample Changer is to be connected to other devices

then only Metrohm cables should be used as these are the only cables

that guarantee perfect data transfer.

Note:

The Remote cable for the 824 Easy Sample Changer have a marking at

each end which indicates the instrument for which the particular end is

intended to be used and the connection to which it is to be connected.

Example (standard Remote cable):

Titrino B

692 / 712 / 713

Before peripheral devices are connected the sample changer must be

switched off as otherwise the instruments could be damaged.

2.6.1 Remote connections

Sample changer — Titrino

with standard cable

Titrino

824

Fig. 13

Connecting a 7xx

Titrino

Cable 6.2141.020