Metrohm Spectrosense - Manual (Page 35)

4 Maintenance
Spectrosense, Instructions for Use
31
The output signal
is too low. • Check if the mirror is tightly screwed onto the
Spectrosense.
• Check if there are any foreign materials or air
bubbles in the optical path.
• Check the mirror surface. If it is scratched, replace
the mirror; order number 6.1250.010.
• Maybe a voltage adjustment of the Spectrosense
has to be done, see Section 5.2.
The output signal
is too high
(> 1200 mV). • Maybe a voltage adjustment of the Spectrosense
has to be done, see Section 5.2.