Metrohm Spectrosense - Manual (Page 28)

1 Introduction
24
Spectrosense, Instructions for Use
1 Introduction
Titration with photometric endpoint recognition is applied in a large number
of official standardized titration methods. It is used when
• potentiometric endpoint indication is impossible
• no suitable potentiometric electrodes are available
• an official method prescribes photometric indication
• the electrode signals are disturbed by sample matrix effects
• an economical but reliable method is preferred
• easy handling and a quick and precise measurement are required.
The Spectrosense is ideal for all photometric titrations. The following model
variants of the Spectrosense are available:
• 6.5501.100 Spectrosense 523 nm for Titrino
• 6.5501.110 Spectrosense 610 nm for Titrino
• 6.5501.200 Spectrosense 523 nm for Titrando
• 6.5501.210 Spectrosense 610 nm for Titrando