Metrohm 874 USB Oven Sample Processor - Manual (Page 75)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 10 Accessories
874 Oven Sample Processor ￭￭￭￭￭￭￭￭ 67
Order no. Description
The clear display provides information about the relevant titration parameters
and gives an unmistakable presentation of the course of titration in the form of
a curve showing µg water against time. Recommended measuring range: 10
µg...200 mg absolute water
Dimensions in mm (W/H/D): 145/ 194/ 307
2.800.0010 800 Dosino
Drive with write/read hardware for intelligent dosing units. With fixed cable.
2.801.0010 801 Stirrer
Magnetic stirrer without stand for use with Titrino plus, Titrandos, Sample Pro-
cessors, 805 Dosimats and 780/781 pH Meters. With permanently attached
cable for MSB (Metrohm Serial Bus).
2.831.0110 831 KF Coulometer incl. diaphragmless generator
electrode
Economical KF Coulometer with diaphragmless titration cell for water determi-
nation right down to trace levels. The KF Coulometer has established itself for
the determination of very small amounts of water. Thanks to its reliability, back-
lit graphical display, multilingual dialog and easy operation, the 756 KF Coulom-
eter has become standard equipment in many laboratories. The clear display
provides information about the relevant titration parameters and gives an
unmistakable presentation of the course of titration in the form of a curve
showing µg water against time. Recommended measuring range: 10 µg...200
mg absolute water
Dimensions in mm (W/H/D): 145/ 169/ 307
2.841.0010 841 Titrando
The Karl Fischer Titrando for the modern titration laboratory. In addition to the
Karl Fischer mode (KFT), this high-end titrator also includes the SET mode, which
means that titrations can be carried out to a predefined endpoint. The high-res-
olution, galvanically separated measuring interface means that it is also possible
to make high-precision pH measurements. Thanks to its four MSB connections
up to four 800 Dosino dosing systems can be connected to the 841 Titrando.
These can be used for titration as well as for the automated addition of sample,
standard and auxiliary solutions such as solubility promoters. All liquid handling
commands are also available, which means that the aspiration of used reagent
and the addition of fresh solvent can be automated.