9 high pressure pump, High pressure pump, 14) from the accessories set – Metrohm 882 Compact IC plus – Anion – MCS User Manual
Page 39: Adsorber (12-4), 3) , then the co, 11) using the sgj clip (12-12)
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
882 Compact IC plus – Anion – MCS
￭￭￭￭￭￭￭￭
29
3
Cotton
4
CO
2
adsorber
Adsorbs CO
2
from the air (e.g. Merck soda
lime with indicator, no. 6839.10).
5
Eluent
6
Aspiration filter (6.2821.090)
7
Filter holder
From accessories set (6.2744.210).
8
Clamping screw
From accessories set (6.2744.210).
9
Tubing weighting
From accessories set (6.2744.210).
10 Eluent bottle (6.1608.070)
11 Bottle attachment (6.1602.160)
12 SGJ clip (6.2023.020)
13 Tubing nipple
14 Threaded stopper
3.9
High pressure pump
The intelligent and low pulsation high pressure pump pumps the eluent
through the system. It is equipped with a chip on which its technical spec-
ifications and "life history" (operating hours, service data, … ) are saved.
The purge valve is used for deaerating (see Chapter 3.9.2, page 32) the
high pressure pump.
3.9.1
Capillary connections high pressure pump/purge valve
Note
All of the capillary connections of the high pressure pump and the
purge valve are already installed in the newly delivered instrument.