Metrohm 882 Compact IC plus – Anion – MCS - Manual (Page 108)

7.10 Metrohm CO
2
Suppressor (MCS)
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
98 ￭￭￭￭￭￭￭￭
882 Compact IC plus – Anion – MCS
7.10 Metrohm CO
2
Suppressor (MCS)
Material fluoropolymer
Resistance to sol-
vents No restriction (apart from PFC)
Vacuum
Working area Microprocessor-controlled / stabilized
Build-up time
after start < 30 s
Capillary volume 400 µL
Recommended
flow range 0.1…1.0 mL
7.11 Mains connection
Required voltage 100…240 V ± 10 % (auto-sensing)
Required fre-
quency 50…60 Hz ± 3 (auto-sensing)
Power consump-
tion ￭ 65 W for typical analysis application
￭ 25 W standby (conductivity detector to 40 °C)
Power supply unit ￭ Up to 300 W maximum, electronically monitored
￭ internal fuse 3.15 A
7.12 Interfaces
USB
Input 1 USB upstream, type B (for connection to the PC)
Output 2 USB downstream, type A
MSB 2 MSB MiniDin 8-pin (female) (for Dosino, stirrer, remote lines, …)
Caution
When connecting an instrument to the MSB connector you must
switch off the 882 Compact IC plus.
Detector 1 DSUB-15-pin high density (female)
Column recogni-
tion for an intelligent column