Metrohm TitrIC 1 - Manual (Page 5)

Application Bulletin 285 e
Installation Instructions of TitrIC 1
Page 5/16
3 Cable connections
The numbers given here ( ,… ) refer to the drawing on the next page.
First all the power cables are connected to the instruments. Both the instruments and the PC remain
switched off.
USB cable from Edgeport to PC – supplied with USB Converter Edgeport/4 (2.145.0320)
RS cable (6.2125.110) from 712 Conductometer to Edgeport port 1
RS cable (6.2134.100) from 2.861.0020 IC to Edgeport port 2 – supplied with 861
USB cable (6.2151.000) from PC to 809 Controller, do not connect!
MSB cable from Dosino 800, 50 mL (Liquid Handling) to 809 MSB 1, do not connect!
MSB cable from Dosino 800, 20 mL (0.1M HCl) to 809 MSB 2, do not connect!
MSB cable from Dosino 800, 10 mL (EDTA solution) to 809 MSB 3, do not connect!
MSB cable from Dosino 800, 20 mL (Auxiliary complexing solution) to 809 MSB 4, do not
connect!
USB cable (6.2151.000) from USB 1 of 809 to controller of 815 – supplied with 815, do not
connect!