Metrohm 860 KF Thermoprep - Manual (Page 13)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction
860 KF Thermoprep ￭￭￭￭￭￭￭￭ 5
Warning
There is a considerable risk of injury connected with the needles.
Grasp the handle of the needle adapter with both hands when you
guide the needle into the sample vessel. Take care to ensure that no
other person reaches into the danger zone during this procedure.
1.3.4 Flammable samples and solvents
Warning
All relevant safety measures are to be observed when working with
flammable samples or when adding solvents.
￭ Use nitrogen or another inert gas for conveying the moisture.
￭ Set up the instrument in a well-ventilated location.
￭ Keep all sources of flame far from the workplace.
￭ Clean up spilled fluids and solids immediately.
￭ Follow the safety instructions of the chemical manufacturer.
1.3.5 Recycling and disposal
This product is covered by European Directive 2002/96/EC, WEEE – Waste
from Electrical and Electronic Equipment.
The correct disposal of your old equipment will help to prevent negative
effects on the environment and public health.
More details about the disposal of your old equipment can be obtained
from your local authorities, from waste disposal companies or from your
local dealer.