Metrohm NIRS XDS Process Analyzer – MicroBundle - Manual (Page 25)

▪▪▪▪▪▪▪ 23
• 20 MHz – Module Control Board
3.11 Power Supply Voltages
• 15VDC, 250W Maximum
• 12 VDC, 40W Maximum
3.12 Resistive Heater in Basic System and Vortec Cooled Systems
• Two (2) 150W, 240VAC resistive heaters, operated at half power.
3.13 Air Conditioner Type
• TECA 500 BTU, Solid State with Resistive Heaters.
3.14 Lamp Source in XDS Process Analytics Instrument
• 42 Watt Tungsten Halogen Reflector Lamp
This lamp is specially processed to enhance NIR energy output and assure stable illumination.
A spare lamp is provided in the Accessory Kit. Do not substitute any lamp other than that
available from Metrohm NIRSystems or its authorized distributor. Metrohm NIRSystems is not
responsible for damage, lost production time, or warranty claims arising from unauthorized
use of a non-Metrohm NIRSystems lamp.
This instrument is to be used only for the purposes described in this manual. Use for any other
purpose may void the safety features built into the XDS Process Analytics Instrument.
Metrohm NIRSystems is not responsible for damage or injury resulting from any use other than those
specifically described in this manual.