Installation and setup, 2 installation and setup – Metrohm 726 TP Backup User Manual

Page 4

Text mode
Original mode

726 TP Backup

8.726.8007 Instructions for Use

2 Installation and setup

2.1 System requirements

Computer

IBM-compatible PC

Operating system

DOS with Windows 3.1x, Windows 95 or NT 4.0

Mouse

required

Memory

min. 4 MB RAM
min. 2 MB free storage on the hard disk,
disk drive 3½"

RS232 interface

for the connection to the 726 Titroprocessor

Connecting cable

6.2125.060
possibly 6.2125.010 Adapter
(adapter cable 25-pin to 9-pin)

726 Titroprocessor

Program version 5.726.0010 or higher

Warning:

Before the RS connecting cable is plugged in or disconnected, both the
PC and the 726 Titroprocessor must be switched off. Connection with
instruments switched on could lead to damage!