Nstallation, 1 setting up the instrument, 2 safety considerations – Metrohm 717 Sample Changer User Manual
Page 7: 3 arranging the accessories, 1 setting up the rinsing equipment, 2 tubing fixation, 3 magnetic stirrers, 4 sample racks, 5 mounting and setting up the titration heads, 4 remote connections
2.1 Setting up the Instrument
717 Sample Changer, Installation
5
2 Installation
2.1 Setting up the Instrument
Packaging
The 717 Sample Changer is supplied with the accessories in
separate special packages designed to ensure maximum protec-
tion. These contain shock-absorbing foam linings. As only these
special packages guarantee damage-free transport of the instru-
ment, it is essential you store them in a safe place.
Control
Immediately following delivery, check that the consignment is
complete and undamaged (compare with delivery note and acces-
sories list, page 29ff). In case of damage, see "Warranty",
page 24.
Setting up
The 717 Sample Changer is a rugged instrument and may be
used in rough environments such as laboratories and manufac-
turing plants. It must not be exposed to a corrosive atmosphere.
If the sample changer is operated in a rough environment, regular
maintenance is strongly recommended.