Metrohm 717 Sample Changer - Manual (Page 14)

2.4 Remote Connections
717 Sample Changer, Installation 12
The required cables are listed in the following table. Details about
the control commands are given in the Instructions for use of the
corresponding instrument.
Instrument Cable
665/725 Dosimat 6.2139.000
711 Liquino 6.2141.020
731 Relay Box 6.2125.100
717 Sample Changer with 759 Swing Head
In order to increase the number of samples, the 759 Swing Head
with a titration head (2.759.0020) or a transfer head (2.759.0010)
can be installed in place of a normal titration head. In this way the
titration head can be moved very accurately to the individual ves-
sels located in several rows on the sample rack. You will find a
more detailed description in the chapter "Swing Head", page 16.
730
The 759 Swing Head is connected via the remote interface with a
special cable. Using the remote cables for the sample changer,
additional instruments can be connected to the remote socket,
while four lines (Input 7 and Output 11–13) are occupied by the
swing head. These four lines are ignored when the swing head is
switched on in the configuration, they are not continued in the
plug.
Connection of further
instruments via the
remote interface