Dulce Systems PRO RX16ex - Manual (Page 33)

PRO RX16ex Installation and User’s Manual
6.1. Replacing a Disk Module
A defective Disk Module can be easily replaced. Hot swapping is allowed without
interruption to your workflow if the RAID is operating in one of the drive
redundant RAID mode (1,3,5,6). Make sure the array is powered on when
removing a defective Disk Module. This will inform the array controller that the
defective Drive Module has been removed.
In a redundant RAID mode, rebuild will start automatically after replacement of a
defective module.
• Pull the Lock Pin to the right and pull the Disk Module out.
Page 33