Dulce Systems PRO RX16ex - Manual (Page 10)

PRO RX16ex Installation and User’s Manual
2. Getting Started
The PRO RX16ex comes pre-assembled and almost ready for use, just install
the Disk Modules, the PCI-e (PCI-express) Host Bus Extender (HBE), connect
the cables, install the software driver and RAID Console. If you are using a Mac,
you are good to go, by default the unit is pre-formatted for Mac OS X operation.
For Windows, a small format procedure is needed.
2.1. Packaging
Please do not discard the boxes and packing materials in case you
might need to reuse them later. Always ship the product in its original
packaging. Improperly packaged products will be subjected to shipping
damage, for which you will be liable for the repair.
2.2. Check List
• Installation and User’s Manual.
• Power Cord (North America user only).
• A 16 disk bay generation 2 system enclosure.
• 16 generation 2 Disk Modules.
• A PCI-e x16 Host Bus Extender card.
• A 3-meter PCI-e x16 Extender Cable.
• Rackmount rails (optional)
Page 10