Nstall the, Attery, Sage – DJI Phantom 2 User Manual User Manual

Page 20

level indicator description for details.

4. The battery is fully charged when the Battery Level indicator lights are off. Please disconnect the charger

and battery when the charging is completed.

Wall Socket

4.2 Install the Battery

Push the battery into the battery compartment correctly as the following diagram shows. Make sure to push the

battery into the compartment until you hear a ‘click’ sound.

Figure 4-1

An incorrectly inserted battery may cause one of the following to occur: (1) Bad contact. (2) Unavailable

battery information. (3) Unsafe for flight. (4) Unable to take off.

4.3 Battery Usage

Figure 4-2

(1) Checking the battery level: When the battery is powered off; pressing the battery power button once will

indicate the current battery level. Refer to < Battery Level Indicator Description> for details.

(2) Powering on: When the battery is powered off; press the battery power button once and then press and hold for

2 seconds to turn on the intelligent battery.

(3) Powering off: When the battery is powered on; press the battery power button once and then press and hold for

2 seconds to turn off the intelligent battery.

LED3

LED4

Battery Power Button

(Built-in Battery Power Indicator)

LED2

LED1

Battery Level Indicator

This manual is related to the following products: