Formatting & printing services available – Cyclopital3D Lighted Print Viewer User Manual

Page 8

Viewer specifications:

Overall dimensions:

Width : 146mm, Height : 90mm, Depth: 115mm

Weight:

510 grams

Tripod Mount: Stainless Steel insert, ¼-20 threaded hole

Image “chip” size:

61mm X 48mm per side

Chip separation:

2mm

Lens separation:

65mm

Lens focal length:

70mm

Lens diameter:

34mm

Lens type:

Achromatic doublet, with anti-reflection coating on both sides

Eye cups:

Elastomeric, fold back for use with eyeglasses

Maximum Horizontal Field Of View (HFOV):

47 degrees

Maximum Vertical Field Of View (VFOV):

38 degrees

Focus System:

Rack and Pinion

Focus range:

+2 to -1 Diopters

Eye Relief:

2mm

Distance from observer to the “Natural” Stereo Window:

7.5ft (2275mm)

Lighting System:

Power Source:

Two AA batteries, NiMH recommended

Battery Life:

Six Hours of light between charges

Emitters:

Ten high output white LEDs

Color Temperature:

5000K, near black body spectrum

Operation:

Press button to turn light on, auto off, 2 minute timer, timer can be

reset by pressing button.

Print Holder specifications:

Overall dimensions:

Width : 160mm, Height : 102mm, Depth: 23mm

Weight:

96 grams

Print size:

Standard 4X6, 4 inches high (102mm) by 6 inches wide (152.4mm)

Print Capacity:

10 prints

Caution

: this is a delicate precision product and should be treated with the

same care given to any fine camera or lens. Do not apply excessive force to the
focus mechanism or the print holder when removing or aƩaching.

Care and Maintenance

Cleaning: use an optical grade lens cleaning cloth. Do not spray liquid directly
onto the Viewer and avoid getting any moisture in any openings.

Product Warranty

The Cyclopital3D Lighted Print Viewer comes with a 90-day warranty against
manufacturing defects in material or workmanship. It is warranted for normal

Formatting & Printing Services Available!

Too busy to format and print your own photos? Let us do it for
you! Cost is only $1.00 per photo, plus $5 shipping and handling.

Simply send us a flash drive with the raw MPO images you
wanted printed to:

Cyclopital3D
323 S. Washington Ave
Fort Collins, CO 80521

Include your phone number or email address with your order
details and we will call or email you to confirm your order and
payment preference. Payment are accepted via check, Paypal or
credit card. Your photos will be mailed to you within 5 days of
confirmation communication.

For processing of edited or .jpg images, an additional processing
fee may apply. Also, please indicate if photos were taken using a
Cyclopital3D Adapter, which model and if an auxiliary lens was
used.