ClearCube A6106D Blade - Manual (Page 5)

Page 5 of 10 P/N G0200152 Rev B, 1.1.12.01.2014
ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com
Installation in A3100 chassis,
Continued
Additional
steps The list below shows some additional deployment and setup steps you can take.

Insert Ethernet cables in the active port or ports, located on the rear of the chassis, for each blade
in the chassis (active ports are indicated by illuminated LEDs).

Install an operating system image appropriate for your environment.
NOTE: Custom images for ClearCube blades have specific requirements. Be
sure to see the technical bulletin specified below for more information.

Set mass storage lockout, which enables you to prohibit and restrict the use of USB-based mass
storage devices (such as flash drives) on ClearCube blades.
A3100 Chassis Ports and Protocol Support
A3100 chassis
Expansion
Backplane As noted above, the A3100 chassis provides power and network connections for A6106D blades. The
picture below shows the A3100 Expansion Backplane, located on the rear of the chassis, which
provides network connections.
Chassis ports
and protocol
assignment Network ports on the rear of the A3100 chassis support different features. The picture below shows
the rear of the chassis and shows protocol support for each port.
Figure 5. The A3100 chassis and Expansion Backplane
Intel AMT Support
(from Primary Ethernet Port)
and Standard Ethernet
Dedicated PCoIP Port
A3100 Chassis and
Expansion Backplane
Standard Ethernet