Calculated Industries 6215 - Manual (Page 5)

4 — Scale Master ® II – PC Interface
INSTALLING THE PC INTERFACE
SOFTWARE
The next step is installing the PC Interface software program to your
computer’s hard drive. Please follow the instructions below for Windows
9x/NT/2000/ME/XP, or the instructions beginning on page 10 for
Windows 3.1 or DOS.
Windows (9x/NT/2000/ME/XP) Installation
1. Insert the compact disc (included in your kit) into your PC’s CD-
ROM drive.
2. If your CD Drive is configured for Autostart, you will see the startup
menu. If this is the case, skip to Step 4.
(continued)
6215UG-E-G 9/2/03 2:38 PM Page 4