Calculated Industries 6215 - Manual (Page 15)

14 — Scale Master ® II – PC Interface
7. When finished rolling, press the [SET] key on your Scale Master II
to send the value on the display to the selected cell in your
spreadsheet or application program.
NOTE: If measuring in feet and inches, the value is automatically
converted from feet-inch format to decimal feet.
8. Once you see the value transferred to the spreadsheet, press the
red [RESET] key on the
Scale Master II to reset the unit and
continue measuring by repeating the above steps.
NOTE: The next value will automatically move to the next cell
directly below the first cell.
6215UG-E-G 9/2/03 2:38 PM Page 14