Calculated Industries 6215 - Manual (Page 19)

18 — Scale Master ® II – PC Interface
EXITING AND REACTIVATING
THE PROGRAM
Exiting SM2 CONNECT Interface Program
The Disable option within the Configuration Menu will close the
connection to the communication port and exit the program.
Reactivating SM2 CONNECT Interface Program
Your Scale Master II PC Interface program must be reactivated or
opened after you turn your computer off and on in order to activate the
interface capability.
If you do not open the program, your SMII will
not be able to communicate with your spreadsheet or estimating
program.
You may instruct the PC Interface program to start up automatically
with Windows by selecting the “Start with Windows” setting in the
Configuration Menu. See Windows (9x/NT/2000/ME/XP) Installation,
page 18, “About the Configuration Menu.”
Or, simply open the PC Interface program by clicking the Start icon at
the bottom left of your PC screen, then Programs, then the SM2
Connect folder, and clicking the SM2 Connect icon to start the
program.
6215UG-E-G 9/2/03 2:38 PM Page 18