Calculated Industries 4065 v3.0 - Manual (Page 30)

U SER ’ S G UIDE — 29
Setting Fixed/Constant Fractional Resolution
You can also program your calculator so that the displayed fraction
will
always show in the fractional resolution you have set (following
the above instructions). That is, instead of solving for the closest
fraction, it will always display the chosen fractional resolution. For
example, if you have chosen 1/64ths via
Ç 6 , 1/2 will be displayed
as 32/64.
If you do not use this feature, Standard Fractional Resolution will be
displayed. In other words, in the above example, 1/2 will be displayed
as 1/2.
To change your calculator to Fixed (or Constant) Fractional Resolution:
1) Turn off your calculator; 2) hold down the fraction bar
/ , then; 3)
Turn your calculator back on.
To display your setting, press ® / and it will read “CNST” and
whatever fractional resolution you’ve selected (e.g., CNST 0-1/64 INCH ).
To return your calculator to the default 1/16” Standard Fractional
Resolution, repeat the above steps, then press
Ç 1 . Press ®
/ to display your setting. In this case, it will read “STD 0 1/16 INCH .”
4065UG-E-B 6/9/04 1:49 PM Page 29