Calculated Industries 4065 v3.0 - Manual (Page 28)

U SER ’ S G UIDE — 27
SETTING FRACTIONAL RESOLUTION
The Construction Master Pro is set to display fractional answers in
16ths of an inch. All examples in this User’s Guide are based on
1/16”. However, you may select the fractional resolution to be dis-
played in other formats (e.g., 1/64”, 1/32”, etc.). The two methods of
changing fractional resolution are shown below.
Setting Fractional Resolution
—
Using the Preference Setting Mode
KEYSTROKE DISPLAY
1. Access Preference Settings:
З Я FRAC 0-1/16 INCH *
2. Access Next Fraction Subsetting:
+ FRAC 0-1/32 INCH
+ FRAC 0-1/64 INCH
+ FRAC 0-1/2 INCH
+ FRAC 0-1/4 INCH
+ FRAC 0-1/8 INCH
+ (returns to 16ths) FRAC 0-1/16 INCH
3. To Permanently Set the Fractional Resolution You Have Selected
Above, press
o (or any key) to set the displayed Fractional
Resolution and Exit Preference Settings.
o 0.
4. To Recall Your Selected Fractional Resolution:
® / STD 0-1/16 INCH
* 1/16” is the default setting. The display may differ from the example depending on
what the resolution is currently set to.
4065UG-E-B 6/9/04 1:49 PM Page 27