Bully Dog Watchdog - Manual (Page 34)

OperATION
49
Set Warning Levels
This very important feature will trigger an audio and visual warning on the WatchDog main screen
during normal operation if a set warning level breaches the user set levels. The two diagrams below
describe the process of setting up a warning level.
Once you select a parameter from the menu above the WatchDog will display the diagram below
where you will actually set the warning level values and turn warning levels on and off.
Pryro 1 Temperature Level
Pryro 2 Temperature Level
Engine Coolant Temperature Level
Boost Level
Go Back SET WARNINGS
Setting: 1250ºF
Setting: OFF
Setting: OFF
Setting: OFF
to Vehicle Setup
PYRO 1
The selected warning
value Pyro 1 Displayed
in the box below
Set warning level
20 MPG
WARNING ON
WARNING OFF
Warning Levels
Selected:
1100
1150
1200
1300
1350
1400
1450
1250
Go Back
to Warning Menu
Scroll up or down
using the indicated
buttons to high-
light the optimal
warning level.
Press the button next to the Warning Pa-
rameter to edit the warning settings for
that parameter. The diagram directly below
displays how to edit an one of the Warning
Parameters.
Press the “Go Back” button when the correct
levels have been set.
Press the “Go Back”
button when the
correct
warning
settings have been
selected.
Use these two but-
tons to toggle turn
the warning notices
On or Off for a par-
ticular parameter.