Bully Dog Watchdog - Manual (Page 22)

OperATION
22
Step 7: Turn the Driving Coach on or off
The Driving Coach can only be displayed on the
main screen if it is turned on either during the Ve-
hicle Setup Wizard or by entering the Driving Coach
Setup menu. In this step select whether you want
the Driving Coach On or Off after finishing the Ve-
hicle Setup Wizard.
Step 8: Verify settings/ setup complete
In this step the Watchdog displays the options you
have selected in the previous steps. Simply verify
that the information is correct by Selecting “Yes,” or
Select “No,” to restart the Vehicle Setup Wizard.
Step 9: Load Learning Instructions
Carefully read the on screen instructions before ex-
iting the Vehicle Setup Wizard. Once you have read
the on screen instruction, which is also displayed in
this screen to the right, exit into the WatchDog Main
Screen.
Special Note: Do not make any changes to the
WatchDog before performing step 9
The WatchDog is waiting to observe 2-3 seconds of
full throttle, changing parameters before performing this step may interrupt the process and result in
inaccurate readings. To successfully perform this test find a safe setting and time to run your vehicle
at full throttle for 2-3 seconds and do so when convenient. Once this step is complete move on to part
2, testing for speed accuracy, of the WatchDog Setup.
DISPLAY COACH
Turn the Driving Coach Display On or
OFF by making your selection below.
Driving Coach ON
Driving Coach OFF
Next
Yes
Accept Settings
No
Start Over
SETUP WIZARD
Engine Size: 5.7Liters
Fuel Type:
Gasoline
Econ Goal: 20 mpg
Accel/Decel: Medium Sensitivity
Are these settings correct?
The WatchDog is must ‘learn’ the
correct ranges of THROTTLE
and LOAD for your vehicle.
When it is safe to do so accelerate at
full throttle for several seconds to tlearn
the throttle and load ranges.
LEARNING Exit