Installation – Bully Dog Watchdog User Manual

Page 15

Text mode
Original mode

INSTALLATION

part 4: MOunting the watChDOg
The final step to installation is mounting the Watchdog to the windshield using the universal
windshield mount.
1. Locate the T-shaped mount socket on the back side of
the Watchdog.
2. Notice that the top of the universal mount will fit
into T-shaped socket and slide forward to secure the
Watchdog to the mount.
3. With the Watchdog connected to the mount use the
windshield mount to secure the Watchdog to the wind-
shield. Be sure that the position of the Watchdog does
not obstruct the view of the road or distract the driver
from their primary responsibility, which is careful driving.

Also available is our 2 1/16” universal gauge mount.
Available on our website or through a Bully Dog Dealer.

PN: 30420