beautypg.com

Rfi cold air intake, Preparing the rfi intake – Bully Dog 53204 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 9

background image

8

RFI COLD AIR INTAKE

8. Remove the mounting plate.

a. Remove all five machine screws. (Use a 10 mm

socket.)

b. Pull the mounting plate out of the engine bay.
c. Set aside three of the machine screws.

Preparing the RFI Intake

1. Remove the MAF sensor assembly from the stock

intake.

a. Loosen the band clamp (use a flat-head

screwdriver).

b. Pull the assembly away from the stock intake.

IMG_2325-6

IMPORTANT: Be careful not to jar the MAF sensor, as this could damage it.

See also other documents in the category Bully Dog For the car: