Bully Dog 53204 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 8)

7
RFI COLD AIR INTAKE
5. Loosen the band clamps on the stock intake. (Use a
flat-head screwdriver.)
• Do not completely detach the band clamps; just
loosen them enough to remove the intake tube.
• One clamp between resonator and throttle body.
• One clamp between intake box and tube.
6. Remove the intake tube and resonator assembly.
• Disconnect at the intake box and the throttle body.
• Pull out of the engine bay as one piece.
7. Remove the stock intake box.
a. Pull up gently to pop the box off the grommets.
b. Remove the box and intake tube assembly as one
piece.