Bully Dog 53204 Rapid Flow Induction (RFI) Cold Air Intake User Manual
Page 2
1
RFI COLD AIR INTAKE
Introduction
This manual provides step-by-step installation instructions for
the Bully Dog Rapid Flow Induction (RFI) Cold Air Intake for
’99 - early ’07 (classic body style) 4.8L, 5.3L, 6.0L and 8.1L
GM pickups and SUVs. Installation requires a few basic tools
and takes about 20 minutes.
Table of Contents
Parts ................................................................... 2-4
Installation .......................................................... 5-12
Maintenance ...................................................... 13-14
Parts Included
RFI Lid ..................................................................(
53104-1
)
RFI Base ...............................................................(
53104-2
)
RFI MAF Tube ......................................................(
53202-3
)
Stage 2 RFI Tube .................................................(
53204-3
)
Air Filter with Band Clamp ...................................(
224800
)
Silicone Coupler ...................................................(
53252-5
)
4.5” Worm Drive Band Clamp (2) .........................(
53252-7
)
Tools Needed
• Flat-head screwdriver
• Phillips screwdriver
• 10 mm socket
• 5/16 socket