beautypg.com

Rfi cold air intake, Installing the rfi intake – Bully Dog 53204 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 11

background image

10

RFI COLD AIR INTAKE

5. Prepare the Stage 2 RFI Tube.

a. Attach the stock coupler to the throttle body side of

the stage 2 tube.

b. Turn the band clamp until the screw is on top (to

allow for easier tightening later).

c. Attach the silicone coupler to the MAF side of the

stage 2 tube.

d. Do not tighten band clamps yet.

Installing the RFI Intake

1. Install the RFI Base and MAF assembly.

a. Mount the base in the engine bay space where the

stock intake box sat.

b. Secure the base with the three 10 mm bolts set

aside on step 8 (page 8).

Stock Coupler

Bully Dog Band Clamps

Silicone Coupler